|
Flybarless Rotor heads upgrades(KL0151) Fits on most 10 mm main shaft 30 to 50 size helis.
Used as an upgrade to the Klone 50SE, Raptor 30/50 from V1 to V2, SE, Titan and other oems helicopters.
Fully ball raced and factory assembled
Metal grips
Metal rotor hub with brake disk
Metal swashplate driver and levers
Hardened main shaft and spindle
90 duro dampers
ROTOR HUB:
Rotor Hub x 1 / Steel Washer 3 * 8 * 1.4 x 2
M3 Nyloc Nut x 1 / M3x22 Hex Head Screw x 1
M3x8 Countersunk Hex Head Screw x 1 / 90 Duro Damper x 1 Set
SWASHPLATE DRIVER:
Swashplate Driver x 1 / M3x10 Button Hex Head Screw x 1
ROTOR GRIP :
Rotor Grip x 1 Set / Washer 6.1 *10 * 0.5 x 2
Thrust bearings x 2 / M4x27 Hex Head Screw x 2
M4 Nyloc Nut x 2 / M4x8 Hex Head Screw x 2
Steel Washer 4 * 11 * 1.7 x 6
MISC:
Swashplate Linkage Balls x 2 / Hardened Main Shaft x 1
Hardened Spindle (KL0150) x 1 / Ball links 20 mm x 4
M2.3x36 Linkage rod x 2 / Linkage Balls 3mm Hole x 4
Copper Spacer 3 * 5 * 1.5 x 2 / M3x10 Button Hex Head Screw x 4
|
