This is the Futaba 12FGH Transmitter and R6014FS 14-ch Receiver with the 2.4GHz FASST system.

      This version is Mode 1-Right Hand Throttle and Left Hand Elevator, European Standard
    **For USA Standard Mode 2-Left Hand Throttle and Right Hand Elevator**
                           **order Futaba 12FGH 12-Channel 2.4GHz/R6014FS Rx Mode 2**

If your transmitter's region code is something other than the United States,the TM-14 Module sold in the United States is not compatible with this transmitter.  As such, it is necessary to purchase the TM-14 module which matches the region code of the transmitter.

     **Additional Technical Info Will Be Added When It Becomes Available.**

When you improve upon all of the best that Futaba 2048 technology has to offer,you have the 12FG-one serious system for discerning R/C pilots. From the state-of-the-art receiver to the capacity to store memory for a whopping 1,882 models, the 12FG has the features and functions to position itself far above the competition. And because it's from Futaba, you can fly with confidence, knowing that the industry's finest research and development is behind you.

Contains software for airplanes, helicopters and gliders.
This is the helicopter version which will default to helicopter settings, with mode 1 stick operation and does not have a ratcheted throttle.

For the latest information about the 12MZ visit the manufacturer's web page at www.2.4gigahertz.com. Some of the system's most impressive highlights include the following:

FEATURES: Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts very quickly virtually eliminating signal conficts and interruptions unlike other 2.4GHz systems that only stay on one or two frequencies
          Dual antenna diversity enables FASST system to automatically and seamlessly select the best reception between the two antennas built into the receiver ensuring that the aircraft stays under constant control of transmitter regardless of altitude
          Pre-Vision Packet Screening technology scans incoming data for potential problems and applies sophisticated error correction techniques for solid impenetrable link with model
          Easy Link system features a unique ID code in the transmitter that links to the receiver insuring that receiver only follows commands from this transmitter-with over 134 million possible codes there is no chance for a conflict
          No hassle Fail Safe programmed through transmitter-no complicated set-up steps or binding plugs
          When performing a ground check, the Power Down function allows modeler to reduce power from up to 50+ paces away-like retracting the antenna on a conventional transmitter
          Purpose built custom IC chips for key functions; no off-the-shelf IC chips
          Digital trims on all 4 main channels
          Ergonomic rubber grips
          Quad-bearing gimbals
          Ultra-precise tuning in .5% increments
          255X196 LCD scren with adjustable contrast

          Programming Features:
            Thirty model memory
            Programming for airplane, glider and helicopter models
            Supports 13 wing types, 3 tail types and 8 heli swash tupes
            Eight flight conditions
            Variable dual rates
            Servo grouping for servo synchronization
            Newly designed "joystick" button and Dial-N-Key editing for easier menu navigating
            Stick Mode-Choose from Mode 1-Mode-4
            Twenty-seven pre-programmed mixes, with built-in shortcuts
            Three swashplate types
            Five-Point Normal and Idle Up Throttle/Pitch Curves
            Revo, Gyro and Swash to Throttle mixing
            Swash AFR Adjustable Function Rate for use w/ 3S or 3E swash types

INCLUDES: Futaba 12FGH Transmitter
          7.2V 1700mAh NiMH Transmitter Battery
          1500mAh NiCd Receiver Battery
          R6014FS Receiver, Futaba R6014FS 14-Channel 2.4GHZ FASST Receiver
          Heavy-Duty Switch Harness
          Futaba Orange Transmitter Neck Strap

REQUIRES: Servos depending on type of aircraft

SPECS:    Transmitter;
            Power Supply: 7.2V
          Receiver;
            Power Requirement: 4.8 - 6V

COMMENTS:
The only chargers that will work with the 12FG is Futaba HBC-2B(4) Transmitter Charger 12FG or Futaba CR-2000 DC Peak Charger (this charger requires charge lead Futaba CR2000 Charge Cord/12FG).