The newly designed Electric RC Helicopter – Raptor E550. The Raptor-E Series are based on a proven design the original Thunder Tiger Raptor Nitro Series.
Specification:
Full Length of fuselage: 1150mm (45.27")
Full width of fuselage: 140mm (5.51")
Total height: 390mm (15.35")
Main rotor dia: 1245mm (49")
Tail rotor dia: 237mm (9.33")
Gear ratio: 1:8.54~12.33:4.56
Full equipped weight: 3,300g ( 7.3 lbs)
Raptor E550 is equipped with the same rotor head and tail drive system of Raptor 30 v2. Combined with a new frame design to adopt the electric power unit. E-CCPM (Electronic Cyclic/Collective Pitch Mixing) control system, reliable flying characteristic, with an optimized frame structure. The Raptor E550 is best entry-level electric helicopter for you to enjoy flying!
Features:
- Reliable Raptor 30 V2 rotor head and tail drive system
- Push-Pull linkage for control surface
- 90° E-CCPM control system (Optional – 140° E-CCPM)
- Aluminium lower side frame
- Easy installation of rear motor mounting system
- Incline battery installation brace
- Optimize gear ratio setting
- Upgradeble to E620 SE
- New Design Raptor-E Decal Set
Comes with:
OBL 43/11-30H Brushless motor and ACE ESC BLC-75
Accessories Needed:
- Radio Set - Transmitter (6 or more channels), Servo x4, Receiver, Battery, Switch Harness, Gyro, Foam, Rubber Band.
- Li-poly battery 5S~6S (Flightpower EVO37005S1P or EVO49005S1P or EVO49006S1P - L)
- Main Rotor Blades - 550 mm, need to be purchased, example use carbon blades NHP1003 or NHP1003W or wood blades PV0039, RCT0055, RCT0126, RCT0126W
|
